Hot melt adhesive machine with 10kg capacity sensor IN120/PT10

ASD-101C product use: can be widely used in footwear industry, home textile industry, packaging box, automobile industry, air filter, gift box, toy industry, leather, electronics, electrical appliances and other different manufacturing industries.

Wybierz liczbę specyfikacji

Proszę sprawdzić informacje o produkcie, który chcesz!

Product details

10 kg hot melt glue machine parameters:

Model number	ASD-10A
Control mode (optional)	PLC
Mode of use	Hand-held applicator/fixed automatic applicator
Heat bath sol velocity	≥10L/Hour
Maximum heating tank capacity	≥10L
Pressure pump pump glue per hour	≥10.0L/h
Control mode	Gear pumps
Maximum service temperature	MAX280℃
Standard rubber export quantity	Route 1-2
Glue pump (optional)	Gear pumps
Working pressure	0.2-0.8Mpa
Power source	AC220V 60/50HZ 3.2KW
Gross weight of equipment	≥50KG
Overall dimension	690L×340W×456H

Product use:

10kg hot melt adhesive machine can be widely used in footwear industry, home textile industry, packaging box, automobile industry, air filter, gift box, toy industry, leather, electronics, electrical appliances and other different manufacturing industries.

Product features:

1. The surface of the inner wall of the rubber cylinder is coated with high winter Fluron to prevent carbonization and ensure the best condition of the glue to reduce blockage;

2. Gear pump adopts frequency conversion speed regulation to accurately control the stable output of glue quantity;

3, multi-stage test precision filter device to remove impurities, prevent nozzle blockage (avoid wire drawing and glue drops);

4, the use of high precision temperature monitoring system (MCU control);

5, the control system has high and low temperature insulation function to prevent damage to the equipment;

6, the rubber cylinder is cast by alloy aluminum, with special design shape and the best heater installation position, to produce the most ideal heating aperture, can achieve the maximum sol effect in the shortest time and the least energy consumption;

7, the hot melt adhesive machine design is suitable for block, granular, strip hot melt adhesive of various shapes, can spray wire, mist, strip, spot and so on;

8, the hot melt glue machine melting speed is fast, uniform glue, stable;

9, the hot melt glue machine can be equipped with automatic glue gun, automatic glue spraying production line;

brak komentarzy

Product details

10 kg hot melt glue machine parameters:

Model number	ASD-10A
Control mode (optional)	PLC
Mode of use	Hand-held applicator/fixed automatic applicator
Heat bath sol velocity	≥10L/Hour
Maximum heating tank capacity	≥10L
Pressure pump pump glue per hour	≥10.0L/h
Control mode	Gear pumps
Maximum service temperature	MAX280℃
Standard rubber export quantity	Route 1-2
Glue pump (optional)	Gear pumps
Working pressure	0.2-0.8Mpa
Power source	AC220V 60/50HZ 3.2KW
Gross weight of equipment	≥50KG
Overall dimension	690L×340W×456H